TM 9--2350--292--20--2
0432 00--1
RIGHT PERSONNEL DOOR ASSEMBLY AND TORSION BAR REPAIR
0432 00
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Assembly, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Endless sling (item 24, WP 0717 00)
Suitable lifting device (350 lbs (158.9 kg) min cap)
Torque wrench (item 2, WP 0717 00)
Materials/Parts
Cotter pin (item 17, WP 0718 00)
Seal (item 187, WP 0718 00)
Seal (item 188, WP 0718 00)
Dry--cleaning solvent (item 1, WP 0716 00)
Rubber based adhesive (item 15, WP 0716 00)
Spring washers (2) (item 167, WP 0718 00)
Strip (item 151, WP 0718 00)
Materials/Parts--Continued
Sealing compound (item 57, WP 0716 00)
Lubricant (item 92, WP 0716 00)
Equipment Conditions
Personnel door locking pin assembly removed
(WP 0430 00)
Personnel Required
Three
References
TM 9--2350--292--10
NOTE
There are two right personnel door assemblies, one each
on the left and right sides of the vehicle. The procedures
are the same for both doors.
Removal
1. Remove two screws (1) and six lubrication fittings (2).
2. Hold personnel door assembly (3) open at a 90° angle.
3. Attach endless sling and suitable lifting device to personnel door assembly (3).
4. Remove two screws (1) and cam retainer (4) from hull.
Figure 208
4
2
3
1
2