TM 9--2350--292--20--2
0431 00--8
LEFT PERSONNEL DOOR ASSEMBLY AND TORSION BAR REPAIR --
CONTINUED
0431 00
Installation
WARNING
WARNING
1. Attach endless sling and suitable lifting device to personnel door assembly (3).
2. Install personnel door assembly (3) on hull with hinge block (9), hinge leaf (8), spacer (7), shim(s) (6) and eight
screws (5).
3. Open personnel door assembly (3) to 90° angle.
NOTE
Align cam with splines of torsion bar so that cam can be
installed on torsion bar.
4. Install cam (14) on torsion bar (15) in center position.
5. Install cam retainer (4) on hull with two screws (1) at outer mounting holes.
6. Close personnel door assembly (3).
7. Install two screws (1) in cam retainer (4) at inner mounting holes.
Figure 21
9
7
6
5
6
8
4
1
3
14
15
DOOR (REF)
HULL (REF)