Disassembly - TM-9-2350-292-20-2

LEFT PERSONNEL DOOR ASSEMBLY AND TORSION BAR REPAIR - TM-9-2350-292-20-2_397

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
364

TM 9--2350--292--20--2 0431 00--4 LEFT PERSONNEL DOOR ASSEMBLY AND TORSION BAR REPAIR -- CONTINUED 0431 00 Disassembly--Continued 5. Remove seal (19), and strip (20), if present, from door (21). Discard seal and strip. NOTE Note the quantity and position of shim(s) being removed to ensure shim(s) are installed in the same position. 6. Remove four screws (22), four flat washers (23), two slides (24) and shim(s) (25) from door (21). 7. Remove cotter pin (26), nut (27), flat washer (28), locking assembly (29), two spring washers (30) and handle (31) from door (21) and armor plate (32). Discard cotter pin and spring washers. 8. Remove spring pin (33) and handle (34) from clevis (35). Discard spring pin. 9. Remove two spring pins (36) and two arms (37 and 38) from clevis (35). Discard spring pins. Figure 209 22 23 24 25 21 31 32 20 19 22 23 24 25 30 27 26 28 29 37 35 34 36 33 38

Privacy Statement
Press Release
Contact