TM 9--2350--292--20--2
VISE AND VISE ADAPTER REPLACEMENT
0483 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (7) (item 12, WP 0718 00)
NOTE
Vise adapter is only used when a vise with three mount-
ing holes is provided with the vehicle.
Four screws, four lockwashers and four flat washers are
used with the four mounting hole vise.
Removal
1. Remove three screws (1), three lockwashers (2), three flat washers (3) and vise (4) from vise adapter (5). Dis-
card lockwashers.
2. Remove four screws (6), four lockwashers (7) and vise adapter (5) from vehicle. Discard lockwashers.
3. Inspect parts for damage and replace as required.
Installation
1. Install vise adapter (5) on vehicle with four screws (6) and four new lockwashers (7).
2. Install vise (4) on vise adapter (5) with three screws (1), three new lockwashers (2) and three flat washers (3).
Figure 250
1
2
3
4
5
6
7
END OF TASK
0483 00--1/2 blank
