TM 9--2350--292--20--2
0488 00--1
OXYGEN TANK RETAINING STRAPS AND GUARD REPLACEMENT
0488 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (2) (item 2, WP 0718 00)
Cotter pins (2) (item 19, WP 0718 00)
Cotter pins (4) (item 126, WP 0718 00)
Equipment Conditions
Oxygen tank removed (TM 9--2350--292--10)
References
TM 9--2350--292--10
Removal
1. Remove two nuts (1), two lockwashers (2) and two flat washers (3) from two eye bolts (4). Discard lockwashers.
2. Remove two cotter pins (5), two straight headed pins (6) and two eye bolts (4) from two retaining straps (7). Dis-
card cotter pins.
3. Remove four cotter pins (8), four straight headed pins (9), four flat washers (10) and four retaining straps (7) from
hull weldment (11). Discard cotter pins.
4. Remove two quick--release pins (12) and guard (13) from hull weldment (11).
5. Inspect parts for damage and replace as required.
Figure 253
1
2
3
7
4
6
5
8
8
9
9
10
10
11
11
12
12
13
7
