TM 9--2350--292--20--2
0590 00--2
AUXILIARY POWER UNIT ENGINE SUPPORT REPLACEMENT -- CONTINUED
0590 00
Removal--Continued
2. Loosen nut (5) on strap assembly (6) and lift end of strap assembly (6) out of notch on engine support (7).
3. Remove cotter pin (8), headless pin (9) and strap assembly (6) from underside of engine support (7). Discard cot-
ter pin.
4. Remove generator adapter (10) from generator (11).
5. Remove four screws (12) and four lockwashers (13), separate engine support (7) from APU assembly (14). Dis-
card lockwashers.
6. Inspect four mounting assemblies (15), replace if worn or damaged.
7. Inspect parts for damage and replace as required.
Installation
1. Install new mounting assemblies (15), as required.
2. Install engine support (7) on APU assembly (14) with four screws (12) and four new lockwashers (13).
Figure 333
12
13
14
7
15
8
9
6
5
11
10
