HIGH PERFORMANCE RESCUE HOIST ASSEMBLY
Type of Manual:
Aviation Unit and Intermediate Maintenance
High Performance Rescue Hoist Assembly, 42305-1
Purpose of Equipment:
Primary function of the rescue hoist is personnel rescue work conducted by
MAINTENANCE FORMS, RECORDS, AND REPORTS
Department of the Army forms and procedures used for equipment maintenance will be those prescribed by (as
applicable) DA PAM 738-750, Functional Users Manual for the Army Maintenance Management System
(TAMMS); DA PAM 738-751, Functional Users Manual for the Army Maintenance Management Systems -
Aviation (TAMMS-A); or AR 700-138, Army Logistics Readiness and Sustainability.
REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR)
If your rescue hoist needs improvement, let us know. Send us an EIR. You, the user, are the only one who can
tell us what you do not like about your equipment. Let us know why you do not like the design or performance. If
you have Internet access, the easiest and fastest way to report problems or suggestions is to go to
https://aeps.ria.army.mil/aepspublic.cfm (scroll down and choose the "Submit Quality Deficiency Report" bar). The
Internet form lets you choose to submit an EIR, a Product Quality Deficiency Report (PDQR) or a Warranty Claim
Action (WCA). You may also submit your information using an SF 368 (PQDR). You can send your SF 368 via e-
mail, regular mail or facsimile using the addresses/facsimile numbers specified in DA PAM 738-750, Functional
Users Manual for the Army Maintenance Management System (TAMMS). We will send you a reply.
CORROSION PREVENTION AND CONTROL (CPC)
CPC of Army material is a continuing concern. It is important that any corrosion problems with this item be
reported so that the problem can be corrected and improvements can be made to prevent the problem in future
items. Corrosion specifically occurs with metals. It is an electrochemical process that causes the degradation of
metals. It is commonly caused by exposure to moisture, acids, bases, or salts. An example is the rusting of iron.
Corrosion damage in metals can be seen, depending on the metal, as tarnishing, pitting, fogging, surface residue,
and/or cracking. Plastics, composites, and rubbers can also degrade. Degradation is caused by thermal (heat),
oxidation (oxygen), salvation (solvents), or photolytic (light, typically UV) processes. The most common exposures
are excessive heat or light. Damage from these processes will appear as cracking, softening, swelling, and/or
breaking. SF Form 368, PQDR should be submitted to the address specified in DA PAM 738-750, Functional
Users Manual for the Army Maintenance Management System (TAMMS).
DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE
For procedures to destroy this equipment to prevent its use by the enemy, refer to TM 750-244-2, Procedures for
Destruction of Electronic Material to Prevent Enemy Use.
It is highly recommended that all maintenance personal attend an approved DoD, TRADOC, and/or OEM hoist
maintenance course prior to performing maintenance on the hoist assembly or any component of the hoist