TM 9--2350--292--10
0055 00--1
OPERATE IMPACT WRENCH.
0055 00
THIS WORK PACKAGE COVERS:
Operate Imapct Wrench
INITIAL SETUP:
Tools and special Tools
Hydraulic impact wrench (item 49, Table 1, WP
0128 00)
Hydraulic impact hose (AR) (item 23, Table 1, WP
0128 00)
Hydraulic impact hose (AR) (item 24, Table 1, WP
0128 00)
References
TM 9--5130--338--12&P
WP 0128 00
WP 0053 00
WP 0054 00
A portable hydraulic impact wrench with hoses is located in the left stowage compartment. It is a 3/4--inch square
drive wrench with two 3/8--inch and two 1/2--inch quick disconnect, self--sealing hoses located in the right stowage
compartment. The impact wrench is hydraulically-driven by the auxiliary hydraulic system. Refer to TM
9--5130--338--12&P for maintenance of the wrench.
1. Check that FUEL PUMP CONTROL handle (1) is in CLOSED position.
2. Remove hose connection caps from impact wrench, impact wrench hoses and hydraulic compartment connectors.
3. Connect two impact wrench hoses (2) to quick--disconnect couplings (3) on impact wrench (4) and hydraulic hose
connections (5).
4. Move FLOW REGULATOR control handle (6) to the 10 position.
5. Start APU (WP 0053 00).
4
2
6
5
1
3