TM 9--2350--292--10
TRACK REMOVAL
0109 00
THIS WORK PACKAGE COVERS:
Removal
INITIAL SETUP:
Tools and Special Tools
Track binder (item 7, Table 2, WP 0128 00)
Adjustable wrench (item 40, Table 2, WP 0128 00)
Materials/Parts
Rope, fiberous (item 29, Table 2, WP 0128 00)
Personnel Required
Three
References
WP 0128 00
WP 0014 00
WP 0108 00
WP 0012 00
WP 0019 00
WP 0102 00
WP 0110 00
WARNING
NOTE
If both tracks are to be replaced, do only one at a time.
1. Disconnect track (WP 0108 00, steps 1 through 19).
2. Remove screw (1) and lockwasher (2) from fender section (3).
3. Secure fender in the up position using rope or wire.
4. Start main engine (WP 0012 00).
5. Turn steering wheel to right if removing left track or turn steering wheel left if removing right track.
6. Shift transmission selector (4) to R (WP 0014 00) and release brakes.
WARNING
7. Using ground guides, move vehicle slowly backwards, keeping a constant, slow speed so track does not become
fouled up in the support rollers.
8. As soon as track leaves sprocket, apply brakes and shift transmission selector to P (WP 0014 00), locking the
steering wheel and brakes. Stop main engine (WP 0019 00).
9. Remove track binder ((WP 0110 00).
10. Close armor skirt plates #1, #3, #5 and #7 (WP 0102 00).
3
1
2
4
END OF TASK
0109 00--1/2 blank