TM 9--2350--292--20--1
0252 00--2
NEUTRAL SAFETY SWITCH REPLACEMENT -- CONTINUED
0252 00
Installation
1. Place neutral safety switch (2) in neutral safety switch housing (5). Make sure neutral safety switch (2) is seated
with switch actuating area centered in opening of neutral safety switch housing (5).
NOTE
If step 2 cannot be performed, neutral safety switch
adjustment screw may require adjustment. Refer to WP
0358 00 or WP 0359 00 for neutral safety switch
adjustment procedure.
2. Install neutral safety switch housing (5) and neutral safety switch (2) on bracket (6) with four screws (3) and four
new lockwashers (4).
3. Connect two circuit no. 14 wires (1) of wiring harness 4W101 to neutral safety switch (2).
Figure 69
1
3
4
6
5
2
NOTE
FOLLOW--ON MAINTENANCE:
Install main switch panel (WP 0242 00)
Install flasher assembly (WP 0253 00)
Connect battery power (WP 0256 00)
END OF TASK