TM 9--2350--292--20--1
0087 00--5
HYDRAULIC OIL CONSTANTLY OVERHEATS -- CONTINUED
0087 00
Is fluid flow detected?
1. Remove caps from right side oil cooler hose
and tee and reconnect hose to tee.
2. Disconnect left side oil cooler hose from tee
and cap both hose and tee with 1--inch caps.
3. Start main engine, energize hydraulics system
and set engine speed to 1800 rpm
(TM 9--2350--292--10).
4. Warm hydraulic fluid to 90--100dF and then
observe flow from hose.
5. Shut down hydraulics and main engine
(TM 9--2350--292--10).
G
CONTINUED ON NEXT PAGE
CONTINUED FROM STEP F
no
yes
Replace left oil cooler
(WP 0230 00). Verify
fault is corrected.
WARNING
FORWARD