QUARTERLY NOTES (CONTINUED)
Note 32
TRAVERSING GEARCASE FILL AND LEVEL
Check oil level of upper and lower sections.
A Open access door in left floor cover.
B
To check upper section oil level, remove plug (1) and check
that oil level is 1/4 in. (6 mm) below top of plug hole.
Fill with oil (OEA) until oil level is 1/4 in. (6 mm) below top of
C
plug hole.
WARNING
I
I
Dry cleaning solvent (SD2) is toxic and flammable.
Wear protective goggles and gloves and use only in
well-ventilated area.
Clean plug (1) with solvent SD2 and install.
D
To check lower section, remove plug dipstick (2) and check
E
that oil level indication is at knurled end on dipstick.
F
Fill with oil (OEA) until oil level indicates on knurled end of
dipstick.
Install plug dipstick (2).
G
Note 33
Lubricate two fittings with GAA.
C a r d 18 of 40
LO 9-2350-238-12