QUARTERLY NOTES (CONTINUED)
Note 36
BOOM WINCH FILL AND LEVEL
Remove boom winch cover to gain access to plugs.
Check oil level.
A Remove fill plug (1) and level plug (2).
B Add oil (OE/HDO or OEA) through fill hole (1) until oil runs out
of level plug hole (2).
WARNING
I
Dry cleaning solvent (SD2) is toxic and flammable.
Wear protective goggles and gloves and use only in
well-ventilated area.
C Clean fill plug (1) and level plug (2) with solvent SD2 and
install.
Note 37
TOW WINCH FILL AND LEVEL
Check oil level.
A Rotate drum until check plug (1) is in horizontal (3 or 9 o'clock)
position.
B Remove check plug (1) at motor end of winch.
C Remove fill plug (2) at brake end.
D Add oil (OE/HDO or OEA) through fill hole (2) until oil runs out
of check plug hole (1).
WARNING
I
I
Dry cleaning solvent (SD2) is toxic and flammable.
Wear protective goggles and gloves and use only in
well-ventilated area.
E Clean fill plug (2) and check plug (1) with solvent SD2 and
install.
C a r d 20 of 40
LO 9-2350-238-12
