SEMIANNUAL NOTES (CONTINUED)
Note 42
AUXILIARY DRIVE DRAIN AND FILL
WARNING
Oil will be hot after operation.
Note
Drain only after operation.
A Remove engine crankcase drain cover (1) from bottom of hull.
Remove auxiliary drive drain cap (2) and drain oil into a suitable
B
container.
WARNING
Dry cleaning solvent (SD2) is toxic and flammable.
Wear protective goggles and gloves and use only in
well-ventilated area.
After draining, clean auxiliary drive drain cap (2) with solvent
C
SD2 and install drain cap and engine crankcase drain cover (1).
D
Open fill cap (3). Fill with oil (OE/HDO or OEA) until oil level is
within FULL and ADD marks on gage (4).
E
Clean and close fill cap (3).
Note 43
TOW WINCH BREATHER
WARNING
I
I
Dry cleaning solvent (SD2) is toxic and flammable.
Wear protective goggles and gloves and use only in
well-ventilated area.
A Remove breather (1) and clean with solvent SD2.
B Dry, inspect, dip in oil (OE/HDO), and install.
LO 9-2350-238-12
C a r d 24 of 40