TM 1-1680-320-13&P
0001 00
HIGH PERFORMANCE RESCUE HOIST ASSEMBLY
GENERAL REPAIR (ONLY THE SPECIFIC REPAIRS ARE AUTHORIZED)
INITIAL SETUP
Personnel Required: 1
References:
UH-1: 15N, Helicopter Repairer
AVUM/AVIM Manual for General Aircraft
UH-60: 15T, Helicopter Repairer
Maintenance TM 1-1500-204-23 series
Hoist Certified: 91W, Flight Medic
Avionic Cleaning and Corrosion
Prevention/Control TM 1-1500-344-23 series
Parts/Materials:
Chemical Conversion Coating
Tools and Special Tools:
N/A
NOTES
Ensure that all parts and assemblies have been cleaned after all repairs, and
replacement of components is completed.
Refer to TM 1-1500-204-23 series for appropriate blending techniques.
1. Superficial surface damage not beyond a depth limit of 0.005 inch shall be blended out.
2. Removal of nicks, scratches, burrs, and corrosion from aluminum and aluminum alloys.
a. Remove nicks, scratches, and burrs by blending.
b. Remove corrosion and blend to surrounding surfaces.
c.
Touch up all reworked areas by applying chemical conversion coating per MIL-C-5541. If more than 25%
of part has been reworked, or condition of finish dictates, anodize per MIL-A-8625.
3. Removal of nicks, scratches, burrs, and corrosion from steel parts.
a. Remove nicks, scratches, and burrs by blending.
b. Remove corrosion and blend repaired area to surrounding surfaces.
