TM 1-1680-320-13&P
0010 00
WARNING
Hoist cable cutter contains an explosive cartridge. Use extreme caution when
handling to prevent injury to personnel. Spark or static producing clothing is
prohibited. Anytime cable cutter harness is disconnected, install shorting device
or piece of aluminum foil between cartridge pins and install shipping cap to
prevent accidental firing.
1. Service hoist in accordance with WP 0018 00 and 0023 00.
2. Inspect electrical cables and connectors to ensure proper electrical connection.
a. Ensure electrical cable harnesses are properly routed free of obstruction and clear of moving parts.
b. Verify harnesses are securely fastened to hoist assembly.
3. Check control panel and control pendant to ensure all operational switches are in the OFF or neutral position
prior to activating input power.
4. Perform preliminary operational checks using a ground power unit, or equivalent, in accordance with WP
End of Work Package
0010 00-6
