TM 1-1680-320-13&P
0018 00
WARNINGS
To prevent damage, use a suitable padded prying device to allow flexible
driveshaft cable to pass between support assembly and winch assembly.
There are two dowel pins; one upper right and one lower left of drum
assembly. Apply even pressure to both dowel pin locations to prevent
damage to boomhead support assembly.
7. Remove bolts (10) and washers (11).
8. Remove boomhead support assembly (9) from winch housing by wrapping padding around tips of a suitable
prying device and prying outward on boomhead support assembly (9) to separate it from winch assembly.
9. Pry upward on upper support assembly to allow the flexible driveshaft to pass between boomhead support
assembly (9) and winch assembly.
0018 00-6
