TM 1-1680-320-13&P
0018 00
HIGH PERFORMANCE RESCUE HOIST ASSEMBLY
BOOMHEAD/SUPPORT ASSEMBLY - REMOVAL
INITIAL SETUP
Personnel Required: 2
References:
UH-1: 15N, Helicopter Repairer
AVUM/AVIM Manual for General Aircraft
UH-60: 15T, Helicopter Repairer
Maintenance TM 1-1500-204-23 series
Hoist Certified: 91W, Flight Medic
Parts/Materials:
Automatic Transmission Fluid
Lockwire (WP 0047 00, Table 1, Item 22)
Packing, MS28775-010
Container, Oil Drain
Tools and Special Tools:
Tool Kit, Aircraft Mechanic
NSN 5180-00-323-4915
Tool Set, Aviation Unit Maintenance
NSN 4920-00-567-0476
WARNING
Hoist cable cutter contains an explosive cartridge. Use extreme care when
handling to prevent injury to personnel. Spark or static producing clothing is
prohibited. Anytime cable cutter harness is disconnected, install shorting device
or piece of aluminum foil between cartridge pins and install shipping cap to
prevent accidental firing.
1. Remove cable cutter assembly in accordance with WP 0017 00.
2. Remove cable assembly in accordance with WP 0016 00.
