TM 1-1680-320-13&P
0034 00
CAUTION
Cable damage will occur if DOWN LIMIT SWITCH (SW2) does not activate.
Observe drum assembly during cable extension. Release control pendant switch
if cable travel does not stop at 5 wraps remaining on drum.
5. Fully extend cable until DOWN LIMIT SWITCH (SW2) activates.
6. Disconnect power.
7. Loosen SW2 cam screw and rotate CAM clockwise (as viewed from gear side), to prevent SW2 cam lobe
from activating SW2 limit switch.
8. Apply power (28 vdc).
0034 00-12
