TM 1-1680-320-13&P
0035 00
1. Position control panel assembly (2) on lower support assembly and install lower bolts (12) and washers (13),
hand tight.
2. Rotate control panel assembly (2) upward to install upper bolts (12).
3. Torque upper and lower bolts (12) 55-70 in. lbs.
4. Tighten four screws (11) on control panel (2).
5. Connect electrical connectors (4, 5, and 6) to control panel (2).
6. Connect the electrical connector (3 and 7) and lockwire.
7. Install control pendant cable (1) on control panel assembly (2).
8. Connect boot (10) to plenum fan assembly and winch assembly using bands (8) and clips (9).
9. Install control pendant cable (1) to control panel assembly (2).
End of Work Package
0035 00-4
