TM 10-1670-262-12&P
Table 2-1. Operator Preventive Maintenance Checks and Services - CONT
Location
Item to
Item
Check/
Not fully mission
No.
Interval
Service
Procedure
capable if:
7
Before
Strap
Inspect for broken or missing stitching;
Components are
Assembly
frayed, worn, or cut webbing; bent, broken,
damaged or
rusted or missing hardware; burrs on
missing.
hardware; snap hook operation; missing
locking pin; broken or missing locking pin
retaining cord.
8
Before
Fast Rope
Inspect for bums, cut yam, abraded yarns,
Material is badly
loose or missing whipping, lines unraveling.
worn or whipping is
missing.
PERSONNEL
INSERTION
EXTRACTION
SYSTEM
9
After
Harness
Inspect for broken or missing stitching;
Components are
frayed, worn, or cut webbing; bent, broken,
damaged or
rusted or missing hardware; foreign
missing.
material.
10
After
Web Loop
Inspect for broken or missing stitching;
Components are
frayed, worn, or cut webbing; bent, broken,
damaged or
rusted or missing hardware, burrs on
missing.
hardware; connector snap operation; dirt,
oil, grease on webbing.
11
After
Strap
Inspect for broken or missing stitching;
Components are
Assembly
frayed, worn, or cut webbing; bent, broken,
damaged or
rusted or missing hardware; burrs on
missing.
hardware; snap hook operation; missing
locking pin; broken or missing locking pin
retaining cord.
12
After
Fast Rope
Inspect for bums, cut yam, abraded yarns,
Material is badly
loose or missing whipping, lines unraveling.
worn or whipping is
missing.
Section III. OPERATION UNDER USUAL CONDITIONS
2-4. Fast Rope Operation.
Refer to SOCOM Regulation 350-6.
2-3