TM 9-2350-238-34-2
16
17
18
19
Apply engine oil (item 15, appx B) on
two new preformed packings (19).
Install two new preformed packings (19)
and two motor control line multiple con-
nectors (20) on housings. Secure motor
control line multiple connectors with
eight screws (21).
Cover port openings on traversing
hydraulic motor to keep dirt out.
NOTE
Perform step 19 only if motor is be-
ing prepared for storage or ship-
ment. Motor is filled with oil and
plug is installed to retain oil during
storage or shipment.
If necessary, apply engine oil (item 15,
appx B) on new preformed packing (22)
and install new preformed packing and
plug (23) to underside of rear housing
(7).
2-49. MAINTENANCE OF TRAVERSING FINAL DRIVE.
This task covers: a.
Disassembly
b. Inspection/Repair
c.
Reassembly
INITIAL SETUP
Tools and Special Tools
General mechanic’s tool kit, automotive
(SC 5180-90-CL-N26)
Handle, remover and replacer (7950864)
Remover and replacer, bearing
(10902750)
Replacer (10904173)
Spanner wrench (GGG-W-665)
References
TM 9-2350-238-20-2
TM 9-2350-238-24P-2
Equipment Conditions
Lubrication fittings removed (TM
9-2350-238-20-2)
2-222 Traversing final drive removed
from cab well
Materials/Parts
Engine oil (item 15, appx B)
Grease (item 9, appx B)
Key washer (2) (MS19070-092)
Plain encased seal (4) (MS51001-36-2)
Preformed packing (MS28775-228)
Retaining ring (4) (10900407)
Spur gear plug insert (10892086)
2-253
