5 Apply engine oil (item 15, appx B) on
new preformed packing (5).
6 Install new preformed packing (5) into
backside of front housing (2).
7 Using hammer and drift, install new
bushing (6) into rear housing (7).
8 Install rotor assembly (8) into rear hous-
ing (7).
9 Install new preformed packing (9) and
plug (10) in rear housing (7).
10 Install new ball bearing (11) on shaft
(12) and using retaining ring pliers,
secure with new retaining ring (13).
TM 9-2350-238-34-2
2-251
