TM 9-2350-256-10
3-6. SUSPENSION AND TRACK-Continued
(5)
Loosen lock screw (6) on track adjusting link (7).
NOTE
If shaft (8) of adjusting link (7) shows a red groove, stop adjusting, fully decrease
tension, and remove one track shoe assembly (see para. 3-6d). Readjust track.
(6)
Use track adjusting wrench (9) to increase or decrease track tension.
(7)
Stop when measured clearance is 0.125 to 0.1875 in. (3.2 to 4.8 mm) from top of line or straight edge
(4) to bottom of track midway between support rollers (2 and 5) at point X (1/2 D).
(8)
Tighten lock screw (6) on track adjusting link (7). Remove block (3) and line or straight edge (4).
c.
Track Disconnect.
(1)
Loosen track tension (see para. 3-6b).
3-22
