TM 9-2350-256-10(9)When teeth of drive sprocket (9) have engaged at least three track links, apply brakes, placetransmission shift lever in P position, and remove rope from hub. With rope still secured to rear tracklink assembly (5), extend rope forward over compensating idler wheel (10).(10)Place transmission shift lever in 1st and release brakes.(11)Operate engine at speed enough to drive sprocket and move free end of track over three supportrollers (11) and toward compensating idler wheel (10). Walk in front and slightly to one side ofvehicle. Keep tension on rope to guide loose end of track over support rollers and compensating idlerwheel.(12)When end of track has passed over compensating idler wheel (10) and track is tight around drivesprocket (9), apply brakes, place transmission shift lever to neutral (N), and shut off engine.3-31
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
