TM 9-2350-256-20-1
0057 00
CORRECTIVE ACTION Continued
23. Reconnect wire H to hydraulic pressure switch. Disconnect bulkhead to APU, master relay, and
rigger's lights wiring harness from APU engine disconnect. Place red lead of multimeter in socket F
of wire 61 and black lead to ground. Turn MASTER, APU pressure, and APU GEN switches ON and
check for voltage. Turn MASTER, APU pressure, and APU GEN switches OFF. If voltage is present,
notify Direct Support Maintenance. If voltage is not present, repair/replace wire 61 of bulkhead to
APU, master relay, and rigger's lights wiring harness (see WP 0225 00).
END OF WORK PACKAGE
0057 00-14
