TM 9-2350-256-20-1
0058 00
CORRECTIVE ACTION Continued
red lead of multimeter in socket K of wire 27 and black lead to ground. Turn MASTER switch on
and check for voltage. Turn MASTER switch OFF. If voltage is present, go to step 4. If voltage is not
present, go to step 5.
4.
Reconnect switch panel to gage panel and miscellaneous switches wiring harness to main switch panel.
Disconnect wire 27 at connector near gage panel. Place red lead of multimeter in female connector of
wire 27 and black lead to ground. Turn MASTER switch on and check for voltage. Turn MASTER
switch OFF. If voltage is present, repair/replace wire 27 of gage panel to bulkhead wiring harness (see
WP 0194 00 for dual voltage; 0195 00 for single voltage). If voltage is not present, repair/replace wire
27 to switch panel to gage panel and miscellaneous switches wiring harness (see WP 0204 00 for dual
voltage; 0205 00 for single voltage).
0058 00-5
