TM 9-2350-256-20-1
0069 00
CORRECTIVE ACTION Continued
6.
Reconnect heater control box to heater wiring harness to HEATER CONTROL box. Disconnect
HEATER CONTROL box to heater wiring harness from the personnel heater. Place red lead of
multimeter in socket E of wire 407 and black lead to ground. Turn MASTER switch on, HEATER
CONTROL switch to START, and check for voltage. Turn MASTER and HEATER CONTROL
switches OFF. If voltage is present, go to step 6. If voltage is not present, repair/replace wire 407 of
heater control box to heater wiring harness (see WP 0236 00).
7.
Place red lead of multimeter in socket B of wire 401 and black lead to ground. Turn MASTER switch
on, HEATER CONTROL switch to START, and check for voltage. Turn MASTER and HEATER
CONTROL switches OFF. If voltage is present, go to step 8. If voltage is not present, repair/replace
wire 401 of heater control box to heater wiring harness (see WP 0236 00).
0069 00-6
