TM 9-2350-256-20-1
0069 00
CORRECTIVE ACTION Continued
8.
Place red lead of multimeter in socket C of wire 403 and black lead to ground. Turn MASTER switch
on, and HEATER CONTROL switch to START, and check for voltage. Turn MASTER and HEATER
CONTROL switches OFF. If voltage is present, go to step 9. If voltage is not present, repair/replace
wire 403 of heater control box to heater wiring harness (see WP 0236 00).
9.
Place red lead of multimeter in socket D of wire 405 and black lead to ground. Turn MASTER switch
on, HEATER CONTROL switch to START, and check for voltage. Turn MASTER and HEATER
CONTROL switches OFF. If voltage is present, go to step 10. If voltage is not present, repair/replace
wire 405 of heater control box to heater wiring harness (see WP 0236 00).
0069 00-7