TM 9-2350-256-20-1
0074 00
CORRECTIVE ACTION
WARNING
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry contacts a metal surface a direct
short may result in instant heating of tools, damage to equipment, and injury or death to personnel.
1.
Disconnect wire 138 from fixed spotlight. Place red lead of multimeter on wire 138 and black lead to
ground. Turn MASTER switch on and check for voltage. Turn MASTER switch OFF. If voltage is
present, replace spotlight (see WP 0181 00). If voltage is not present, go to step 2.
2.
Reconnect wire 138 to fixed spotlight. Disconnect electrical accessories panel wiring harness from
electrical accessories panel. Place a jumper wire from pin A to socket A of wire 38/59. Place red lead
of multimeter on pin F of wire 38 and black lead to ground. Turn MASTER switch on and check for
voltage. Turn MASTER switch OFF. If voltage is present, repair/replace wire 38/138 of electrical
accessories panel wiring harness (see WP 0196 00). If voltage is not present, go to step 3.
0074 00-3
