TM 9-2350-256-20-1
0080 00
CORRECTIVE ACTION Continued
5.
Place red lead of multimeter on pin D of wire 75/16 and black lead on pin L of wire 75. Check for
continuity. If continuity is present, go to step 6. If continuity is not present, go to step 9.
6.
Reconnect switch panel to gage panel and miscellaneous switches wiring harness to main switch panel.
Disconnect main lighting and master relay wiring harness from main lighting switch. Place red lead of
multimeter on pin C and black lead on pin K. Check for continuity. If continuity is present, go to step 7.
If continuity is not present, replace main lighting switch (see WP 0159 00).
0080 00-6
