TM 9-2350-256-20-1
0084 00
CORRECTIVE ACTION Continued
2.
Disconnect headlight base assembly from left hand headlight assembly. Place red lead of multimeter
in socket G of wire 19 and black lead to ground. Turn MASTER switch ON, press B.O. DRIVE key
and ENTER key on main light switch, and check for voltage. Turn MASTER, main lighting, and B.O.
SELECTOR switches OFF. If voltage is present, replace headlight assembly (see WP 0175 00). If
voltage is not present, go to step 3.
3.
Reconnect headlight base assembly to left hand headlight assembly. Disconnect wire 19 of headlight
and dimmer switch wiring harness from switch panel to gage panel and miscellaneous switches wiring
harness. Place red lead of multimeter on male connector of wire 19 and black lead to ground. Turn
MASTER switch ON, press B.O. DRIVE key and press ENTER key on main light switch. Place B.O.
SELECTOR switch to B.O. position and check for voltage. Turn MASTER, main lighting, and B.O.
SELECTOR switches OFF. If voltage is present, go to step 4. If voltage is not present, go to step 5.
0084 00-3
