TM 9-2350-256-20-1
0093 00
CORRECTIVE ACTION Continued
9.
Reconnect batteries to master relay, voltage regulators, slave receptacle, and engine disconnect wiring
harness to engine disconnect. Disconnect wire K of starter module wiring harness from engine wiring
harness near engine disconnect. Place red lead of multimeter in female connector of wire K and black
lead to ground. Turn MASTER switch on and check for voltage. Turn MASTER switch OFF. If voltage
is present, repair/replace wire K of engine wiring harness (see WP 0207 00 for dual voltage; 0208 00
for single voltage). If voltage is not present, repair/replace wire K of module starter wiring harness (see
WP 0189 00).
END OF WORK PACKAGE
0093 00-7/8 blank
