TM 9-2350-256-20-1
0098 00
Installation
NOTE
Prior to installation, inspect and adjust fire extinguisher nozzles in engine compartment and check that
all powerplant lines, cables, accessories, and other components are properly installed, tightened, and
adjusted. Inspect transmission output reduction drives and engine mountings and connections in engine
compartment to determine if items are serviceable and positioned to receive powerplant.
NOTE
Clean (flush) engine compartment prior to installation of powerplant.
NOTE
Prior to installation of powerplant, perform necessary engine compartment lubricating procedures (refer
to TM 9-2350-256-10).
1.
Remove steering clutch housing output shaft parts kit (79). Uncover left and right output reduction assemblies in hull.
CAUTION
When installing powerplant, be sure transmission guide rollers (80) are inserted into transmission guide
rails (81).
0098 00-9
