TM 9-2350-256-20-1
0098 00
NOTE
Be sure that all tape, caps, and other protective closure items have been removed before installation.
2.
Install two preformed packings (77) on each side of transmission saddle (78).
WARNING
All personnel must stand clear during lifting operation. A swinging or shifting load may cause injury or
death to personnel.
3.
Install powerplant (75) in vehicle hull (76) using sling (74).
4.
Torque engine mount release rod (69) to 4248 pound-feet (lb-ft) (5765 newton-meters [Nm] ) to secure engine to hull.
NOTE
Perform step 5 if engine mount (68) was accessed and released from underneath the hull.
5.
Install access cover (70) with six lockwashers (72) and six screws (71).
0098 00-10
