TM 9-2350-256-20-1
0136 00
Removal
1.
Remove tube assembly (1) by loosening union at each end of tube assembly.
2.
Remove five clamps (2) by removing self-locking nut (3) and screw (4) from each.
NOTE
Left bank does not have self-locking nut (5) and clamp (6).
3.
Remove self-locking nut (5) and clamp (6).
4.
Remove tube assembly (7) by loosening union at each end of tube assembly.
5.
Remove elbow (8) and bushing (9) from nozzle assembly (10).
6.
Remove two clamps (11) by removing two screws (12).
7.
Remove tube assembly (13) by loosening union at each end of tube assembly.
8.
Remove elbow (14) from nozzle assembly (10).
Installation
1.
Install elbow (14) onto nozzle assembly (10).
2.
Install tube assembly (13) by tightening union at each end of tube assembly.
3.
Install two clamps (11) with two screws (12).
4.
Install bushing (9) and elbow (8) onto nozzle assembly (10).
5.
Install tube assembly (7) by tightening union at each end of tube assembly.
6.
Install clamp (6) with self-locking nut (5).
7.
Install five clamps (2) each with self-locking nut (3) and screw (4).
8.
Install tube assembly (1) by tightening union at each end of tube assembly.
0136 00-2
