TM 9-2350-256-20-1
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
MANIFOLD HEATER NOZZLE ASSEMBLY MAINTENANCE
REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Nuts, self-locking (8) (item 491, WP 0491 00)
Materials/Parts
Screw (item 558, WP 0491 00)
Bushing (item 422, WP 0491 00)
Spark plugs (with gasket) (2) (item 429, WP 0491 00)
Gaskets (2) (item 310, WP 0491 00)
Washers, flat (8) (item 305, WP 0491 00)
WARNING
Do not smoke or use open flame when working on fuel system: explosion may occur, causing severe
injury or death.
NOTE
Removal and installation procedures are the same for both the left and right bank. Right bank shown.
Removal
1.
Disconnect electrical lead (1) from spark plug (with gasket) (2).
2.
Disconnect fuel inlet hose (3) from fuel inlet elbow (4). Remove fuel inlet elbow and bushing (5).
3.
Disconnect fuel return tube (6) from fuel return elbow (7). Remove fuel return elbow.
4.
Remove manifold heater (8) and gasket (9) by removing four self-locking nuts (10) and four flat washers (11). Discard
gasket.
0134 00-1
