TM 9-2350-256-20-1
0132 00
Removal
1.
Disconnect two electrical wiring harness connectors (1) from manifold heater ignition unit (2).
2.
Remove two screws (3) and two self-locking nuts (4). Remove two clamps (5) and manifold heater ignition unit (2).
Installation
1.
Install manifold heater ignition unit (2) into two clamps (5) and secure with two screws (3) and two self-locking nuts (4).
2.
Connect two electrical wiring harness connectors (1) on manifold heater ignition unit (2).
NOTE
Follow-on maintenance: Install powerplant (see WP 0098 00).
END OF WORK PACKAGE
0132 00-2
