TM 9-2350-256-20-1
0146 00
Removal
1.
Remove shroud mounting (1) by removing four screws (2) and four lockwashers (3).
2.
Remove support assembly (4) by removing four screws (5) and four lockwashers (6).
3.
Remove six self-locking nuts (7) and six flat washers (8) from each side of shroud (9).
4.
Remove four screws (10) from end of shroud (9).
5.
Remove two screws (11) from rear side of shroud (9).
6.
Remove shroud (9) from engine.
Installation
1.
Install shroud (9) on engine with four screws (10) at end of shroud.
2.
Install two screws (11) to rear side of shroud (9).
3.
Install six self-locking nuts (7) and six flat washers (8) to each side of shroud (9).
4.
Install support assembly (4) with four screws (5) and four lockwashers (6).
5.
Install shroud mounting (1) with four screws (2) and four lockwashers (3).
NOTE
Follow-on maintenance: Install cooling fan housings (see WP 0145 00).
END OF WORK PACKAGE
0146 00-2
