TM 9-2350-256-20-2
0154 00
10. Remove eight insulators (29) by removing eight screws (30) and flat washers (28) if required.
11. Remove instruction plate (31) from mounting plate (25) by removing two drivescrews (32).
Installation
1.
Install instruction plate (31) to mounting plate (25) using two drivescrews (32).
NOTE
Shim single voltage regulators using flat washers (28) to provide solid mounting.
NOTE
Flat washers (28) are used for single voltage regulator configurations only.
2.
Install eight insulators (29) to voltage regulators (17 and 18) using eight screws (30) and flat washers (28) if required.
3.
Install mounting plate (25) using eight screws (26) and eight lockwashers (27).
4.
Install two mounting brackets (22) using four screws (23) and four lockwashers (24) each.
5.
Install mounting bracket (10) using two screws (19), four flat washers (20), and two nuts (21).
0154 00-3
