TM 9-2350-256-20-2
0154 00
6.
Install two wiring harnesses (9) to main engine voltage regulator (18) and two wiring harnesses (8) to APU voltage regulator
(17).
7.
Install screw (15) and ground wire (16).
8.
Connect two wiring harnesses (9) and two wiring harnesses (8) to mounting bracket (10) using four clamps (11), four
screws (12), four lockwashers (13), and four nuts (14).
9.
Install ground strap (4) using screw (5) at one end of ground strap and screw (6) and lockwasher (7) at other end of ground
strap.
10. Install access cover (1) using four screws (2) and four lockwashers (3).
11. Close access door (see WP 0336 00).
NOTE
Follow-on maintenance: Install air inlet doors (see WP 0341 00).
END OF WORK PACKAGE
0154 00-4
