TM 9-2350-256-20-2
0171 00
Installation
NOTE
Apply sealing compound to threads of all sending units (4 and 8) and switches (2 and 10).
1.
Install switch (10).
2.
Install engine oil temperature sending unit (8) and connect connector (9) to switch (10).
3.
Connect connector (7) to engine oil temperature sending unit (8).
4.
Install main engine oil pressure switch (6) and connect connector (5).
5.
Install engine oil pressure sending unit (4) and connect connector (3).
6.
Install switch (2) and connect connector (1).
7.
Install test cables and hoses. Test run engine prior to installation. Observe for leaks.
NOTE
Follow-on maintenance: Install powerplant (see WP 0098 00).
END OF WORK PACKAGE
0171 00-2