TM 9-2350-256-20-2
0173 00
2.
Disconnect two connectors (6) from rigger's light selector switch (3).
3.
Remove rigger's light selector switch (3) and ID plate (7) from switch mount (1) by removing two screws (8).
Installation
1.
Install rigger's light selector switch (3) and ID plate (7) on switch mount (1) using two screws (8).
2.
Connect two connectors (6) to rigger's light selector switch (3).
3.
Install switch mount (1) and clamp (2) on hull wall using two screws (4) and two lockwashers (5).
END OF WORK PACKAGE
0173 00-2
