TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
STOPLIGHT SWITCH REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts
Tool kit, general mechanic's (item 59, WP 0490 00)
Lockwashers (2) (item 621, WP 0491 00)
Screws (2) (item 731, WP 0491 00)
Washers, slotted (2) (item 293, WP 0491 00)
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and
burns.
Removal
1.
Disconnect two connectors (1) and remove two slotted washers (2) and two connector shells (3).
2.
Remove stoplight switch (4) by removing two screws (5) and two lockwashers (6).
Installation
1.
Install stoplight switch (4) using two lockwashers (6) and two screws (5).
2.
Assemble two connector shells (3) and two slotted washers (2) to two connectors (1) and connect connectors.
END OF WORK PACKAGE
0172 00-1/2 blank
