TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
SPARE HEADLIGHT MOUNT BASE ASSEMBLY REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool kit, general mechanic's (item 59, WP 0490 00)
Lockwashers (3) (item 621, WP 0491 00)
Screws (2) (item 567, WP 0491 00)
Materials/Parts
Screws (3) (item 731, WP 0491 00)
Lockwashers (2) (item 618, WP 0491 00)
Washers, flat (3) (item 534, WP 0491 00)
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and
burns.
NOTE
Removal and installation procedures are the same for both spare headlight mount base assemblies.
Removal
1.
Remove protective cap (1).
2.
Remove base (2) by removing three screws (3), three lockwashers (4), and three flat washers (5).
3.
Remove clip (6) by removing two screws (7) and two lockwashers (8).
0178 00-1
