TM 9-2350-256-20-2
0179 00
NOTE
Clean and dry all parts, paying particular attention to contacts.
Disassembly
1.
Remove door light assembly (10) by loosening six captive screws (11).
2.
Remove and discard preformed packing (12).
3.
Remove two lamps (13) by depressing and turning counterclockwise.
4.
Disassemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Assembly
1.
Assemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
2.
Install two lamps (13) by depressing and turning clockwise.
3.
Install preformed packing (12).
4.
Install door light assembly (10) by tightening six captive screws (11).
Installation
1.
Install taillight (6) on support bracket (7) using two screws (8) and two lockwashers (9).
2.
Install grommet (5) over two connectors (4) and then place grommet into hole on hydraulic access plate (1). Connect
connectors.
3.
Install hydraulic access plate (1) using two screws (2) and two lockwashers (3).
END OF WORK PACKAGE
0179 00-3/4 blank
