TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
HIGH BEAM INDICATOR LIGHT ASSEMBLY MAINTENANCE
REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Lockwashers (2) (item 611, WP 0491 00)
Materials/Parts
Packing, preformed (item 225, WP 0491 00)
Drivescrews (2) (item 501, WP 0491 00)
Screws (2) (item 575, WP 0491 00)
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and
burns.
Removal
1.
Disconnect connector (1).
2.
Remove light lens (2) from indicator light (3) by turning counterclockwise.
3.
Remove indicator light (3) by removing two screws (4) and two lockwashers (5).
4.
Remove ID plate (6) by removing two drive screws (7).
0182 00-1
