TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
DOME LIGHT MAINTENANCE
REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Rings, reaining (32) (item 213, WP 0491 00)
Screws (32) (item 212, WP 0491 00)
Materials/Parts
Screws (4) (item 215, WP 0491 00)
Lockwashers (16) (item 634, WP 0491 00)
Screws (16) (item 778, WP 0491 00)
Lockwires (4) (item 327, WP 0491 00)
Seal, rubber (4) (item 276, WP 0491 00)
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and
burns.
NOTE
The following procedures are the same for all four dome lights.
Removal
1.
Disconnect connector (1).
2.
Remove dome light (2) by removing four screws (3) and four lockwashers (4).
0183 00-1
