TM 9-2350-256-20-2
0181 00
Disassembly
1.
Remove lens retainer (18) by removing screw (19).
2.
Disconnect and remove lamp (20) from rigger's fixed spotlight (14).
Assembly
1.
Install and connect lamp (20) to rigger's fixed spotlight (14).
2.
Install lens retainer (18) using screw (19).
Installation
NOTE
Clean and dry all parts.
1.
Install rigger's fixed spotlight (14) in cab opening using nut (15), collet (16), and nut (17).
2.
Install connector shell (11) over wire (12) and secure using C-washer (13).
3.
Install switch assembly (9) on shaft (10).
4.
Install body (8) using two screws (7).
5.
Install gear bolt (6).
6.
Install handle (3) and spacer (4) by tightening screw (5).
7.
Install socket head screw (2) and connect connector (1).
END OF WORK PACKAGE
0181 00-3/4 blank
