TM 9-2350-256-20-2
0192 00
3.
Disconnect connector (2) from main engine voltage regulator (9) by removing screw (10), lockwasher (11), nut (12), and
clamp (13).
4.
Disconnect connectors (3 and 4) from bulkhead to main engine bracket and rear fuel tank transmitter wiring harness (14).
Disassembly
1.
Disassemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Assembly
1.
Assemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Installation
Connect connectors (3 and 4) to bulkhead to main engine bracket and rear fuel tank transmitter wiring harness (14).
1.
Connect connector (2) to main engine dual voltage regulator (9).
2.
Connect connector (1) to engine disconnect bracket (8).
3.
Install two clamps (5) using lockwasher (7) and screw (6) for each.
4.
NOTE
Follow-on maintenance: Install voltage regulator access cover (see WP 0154 00); Install engine deck
(see WP 0336 00).
END OF WORK PACKAGE
0192 00-3/4 blank
